With the advent of the 5G , smart city led light pole have become more and more popular and have become an indispensable carrier for 5G carrying. With this, the demand for smart city commercial displays has increased, and LED light pole screens are the leader in smart commercial displays. Becoming more and more popular. As a result, many new LED light pole screen manufacturers have emerged on the market, and LED smart light pole screen styles are also emerging one after another. Faced with this situation, how customers choose a high-quality LED light pole screen? As a professional manufacturer of smart city LED light pole screens for many years, Gotech Co., Ltd. has some experience to share:

First, the brightness must be high, at least 7000CD/㎡
1. The brightness above 7000CD/㎡, so as to show a clear picture in the day when the light is sufficient;
2. For many LED light pole screens, when the brightness is around 7000CD, the performance is the best, the heat is the least, and the stability is the best;
3. The life of many LED light pole screens is only 4-5 years, but the brightness decays over time, it will gradually attenuate from 7000CD/㎡ to 5000CD/㎡, and the brightness is less than 5000CD/㎡ during the day and the display is not clear.
Gotech insists on using national star, kinglight and other brands of lamp beads, with high brightness, stable performance and undead lamps.

Second, high and low temperature resistance (-20~65℃)
LED light pole screens are often used outdoors (rarely used in underground pedestrian streets), and work for a long time, the use environment is harsh, and the equipment requires less heat and fast heat dissipation, so high-performance components must be used, and a high-quality power supply It can be matched with a fan to ensure that the device can work normally in extreme cold and hot temperatures.
Gotech uses high-quality solder paste, the lamp beads do not fall off, and there is no dead point. It uses CE-certified power supplies and silent fans such as Mingwei, Nandian, and Xinxing.

Third, the protection performance is better (IP65 or above)
LED light pole screen works outside all year round, wind, sun, rain and frost. If there is no high-level protection, the product is prone to problems. In the slightest, the LED module will be damaged, causing some equipment to work poorly, and in the worst case, the circuit will be short-circuited, causing a fire accident. , Threatening personal safety, so the module should choose the surface glue and the module with mask protection, and the cabinet should be corrosion-resistant, high-strength, and high-sealing.
Gotech’s new private model outdoor P2.5 small-pitch module, P2.84 outdoor full-color module, outdoor P3LED module, and P3.33 full-color module, the size is flexible and changeable, the use of V0 fire rating kits, all With mask protection, maximum protection of the lamp beads.

Fourth, high-quality graphics
In order to meet the delicate picture, the screen body should be at least smooth and seamless, the ink color of the module mask should be consistent, and the IC refresh rate should be high. Many manufacturers choose cheap module kits, resulting in large splicing gaps and low flatness, which seriously affects the viewing effect.
Almost all modules of Gotech are all independently designed, and the splicing effect and screen display effect are far better than those of peers.

Fifth, energy saving.
Led light pole displays are often used in clusters, and a project generally ranges from tens to hundreds of units. If each light pole screen saves 2 kilowatt-hours of electricity per day, each can save more than 700 kilowatt-hours of electricity in a year, and hundreds of thousands to hundreds of thousands of electricity can be saved in the annual photovoltaic fee of hundreds of units, and the operating cost will be greatly reduced. Therefore, energy-saving solutions must be adopted for module design, component selection, accessories (power supply and receiving card) use, and wire layout.
Compared with its peers, Gotech Smart City LED light pole screens can save energy by 30% to 40%, allowing customers to recover costs and create benefits in a shorter time.

Sixth, the line layout is streamlined and beautiful
The streamlined circuit layout can reflect the professionalism of the manufacturer, reduce power loss, improve product stability, and avoid short circuit interference problems caused by complex and interlaced circuits.

Gotech LED light pole screen layout is simple, pay attention to horizontal and vertical, beautiful and generous

With excellent quality, reasonable price and high-quality service, Gotech LED light pole screen has created a good reputation in the industry and won a group of loyal customers.

Part of the case show:

Wuhan Jianghan Road P2.5 Outdoor Small Pitch LED Light Pole Screen 480x960mm

武汉江汉路P2.5LED灯杆屏项目-01.jpg